Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer
2027TR-H71RF/H71FRF/H71QRF. Installation and maintainance should be
performed by experienced technicians only.
The SuperServer 2027TR-H71RF/H71FRF/H71QRF is a high-end server based on
the SC217HQ-R1620B 2U rackmount chassis and the X9DRT-HIBQF/HIBFF/HF
dual processor serverboards. All models have an IPMI LAN port and four
serverboard nodes, each with six hot-swap Hard Disk Drives (HDD) each per node.
Each of the various models of the SuperServer 2027TR-H71RF/H71FRF/H71QRF
servers and their associated serverboards for each of their unique options are listed
in the table below:
SUPERSERVER 2027TR-H71RF/H71FRF/H71QRF Model Variations
Server
Model
2027TR-H71QRF
2027TR-H71FRF
2027TR-H71RF
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the X9DRT-HIBQF/HIBFF/HF
serverboard and the SC217HQ-R1620B chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer
2027TR-H71RF/H71FRF/H71QRF into a rack and check out the server confi guration
prior to powering up the system. If your server was ordered without processor and
memory components, this chapter will refer you to the appropriate sections of the
manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Preface
X9DRT
Serverboard
X9DRT-HIBQF
X9DRT-HIBFF
X9DRT-HF
iii
Infi niBand
QDR
YES
Preface
Infi niBand
FDR
YES
Advertisement
Table of Contents
