SUPERSERVER 2027TR-H71RF/H71FRF/H71QRF USER'S MANUAL
1-2
Serverboard Features
At the heart of the 2027TR-H71RF/H71FRF/H71QRF server lies the
X9DRT-HIBQF/HIBFF/HF, a dual processor serverboard based on the Intel
C602 chipset and designed to provide maximum performance. four of these
serverboards can be mounted in the SC217HQ-R1620B chassis.
The sections below cover the main features of the X9DRT-HIBQF/HIBFF/HF
serverboard (see Figure 1-1 for a block diagram of the chipset).
Processors
The X9DRT-HIBQF/HIBFF/HF supports single or dual Intel Xeon
processors (Socket R LGA 2011). Please refer to the serverboard description pages
on our web site for a complete listing of supported processors (www.supermicro.
com).
Memory
The X9DRT-HIBQF/HIBFF/HF has eight (8) DIMM slots supporting up to 256 GB
of DDR3-1600/1333/1066/800 MHz speed registered ECC SDRAM in up to
512 MB, 1 GB, 2 GB, 4 GB, 8 GB, 16 GB or 32 GB sizes at 1.35V or 1.5V
voltages. See Chapter 5 for details.
Note: Check the Supermicro website (www.supermicro.com) for the latest memory
support information.
SAS
An LSI
®
SAS2108 SAS2 controller is integrated into the BPN-ADP-SAS2-H6IR-O-P
backplane to provide an eight port 6 Gb/s SAS2 (Serial Attached SCSI) subsystem,
which is RAID 0, 1, 5, 6 and 10 supported. The SAS drives are hot-swappable
units.
Note: The operating system you use must have RAID support to enable the
hotswap capability and RAID function of the SAS drives.
PCI Expansion Slots
The SuperServer 2027TR-H71RF/H71FRF/H71QRF has for each node
one (1) PCI Express 3.0 x16 slot (Slot 1) available for use with a riser card.
1-2
®
®
E5-2600 series