Skip Channels; Priority Watch - Icom IC-V82 Instruction Manual

8
SCAN OPERATION

■ Skip channels

In order to speed up the scan rate, you can select memory
channels you don't wish to scan as skip channels.
q Push [C•
] to select memory mode, if necessary.
MR
• " X " appears.
w Select a memory channel to set as a skip channel.
ePush [A•
] and [6•
FUNC
and OFF.
• "SKIP" appears when the channel is set as a skip channel.
6
A
Push
FUNC
SKIP
32
] to toggle the skip setting ON
SKIP
"SKIP" appears

■ Priority watch

Priority watch checks for signals on "priority channels" while
operating on a VFO frequency.
D Memory or call channel watch
While operating on a VFO frequency, memory or call channel
watch monitors for signals in the selected memory or call
channel every 5 sec.
q Select the desired memory channel or the call channel.
w Push [D•
] to select VFO mode.
CLR
e Push [A•
], then push [7•
FUNC
• VFO is displayed, then the decimal point ".", on the frequency
readout blinks.
• The priority channel is monitored every 5 sec.
• When the signal is detected on the priority channel, the watching
is suspended according to the setting of the scan resume condi-
tion.
VFO frequency
5 sec.
r Push [D•
] to stop watching.
CLR
] to start watching.
PRIO
Memory channel
50 msec.