Setting Other Items - Icom IC-V82 Instruction Manual

■ Setting other items

qPush [A•
] and [0•
FUNC OPT
push [Y Y ] or [Z Z ] several times to select the desired item.
w Rotate [VOL] to select the desired value or condition.
• To exit , push [✱•
SET MODE ENT
Enter
A
FUNC
0
OPT
D D Auto Reply
During digital mode operation, auto reply function is available.
This function replies to an individual station call even you are
away from the transceiver.
After the manual transmission (pushing [PTT]) or message
transmission, the Auto Reply setting returns to OFF automat-
ically.
] to enter , then
OPTION SET MODE
] (or [D• ]).
CLR
Set Exit
[VOL]
ENT
(default: OFF)
DIGITAL MODE OPERATION
D D Digital Code
Sets the desired digital code for digital code squelch opera-
tion. Total of 100 codes (00–99) are available.
D D Auto data Transmission
During low-speed data operation, auto data transmission
function is available. This function transmits when data has
been input from PC via the [DATA] jack.
After the manual transmission (pushing [PTT]), the Auto
Transmission setting returns to OFF automatically.
11
(default: 00)
(default: OFF)
11
53