Transferring Bank Contents - Icom IC-V82 Instruction Manual

6
MEMORY/CALL OPERATION

■ Transferring bank contents

Contents of programmed memory banks can be cleared or
transferred to another bank.
INFORMATION: Even if the memory bank contents are
cleared, the memory channel contents still remain pro-
grammed.
q Select the desired bank contents to be transferred or erased.
➥ Push [C•
] to select memory mode.
MR
➥ Push [A•
FUNC
then rotate [VOL] to select the
desired memory bank.
• Bank indicator blinks.
➥ Push [✱•
ENT
select the bank then push [Y Y ]
and [Z Z ] to select the desired con-
tents.
• Bank indicator stops blinking.
26
] and [#• ],
BANK
] (or [D• ]) to
CLR
w Push [A•
FUNC
.
SET MODE
e Push [Y Y ] or [Z Z ] several times until
"bAk" appears.
• Bank indicator appears.
r Rotate [VOL] to select the desired
[VOL]
bank to receive the transferred infor-
mation or erase the bank contents.
• Select "– –" indication when erasing the
contents from the bank.
t Push [✱•
ENT
turn to regular memory mode.
y Repeat steps q to t for transferring or erasing an an-
A
FUNC
other bank's contents.
BANK
ENT
] and [8• ] to enter
SET
] (or [D• ]) to transfer or erase, and re-
CLR
[VOL]
A
FUNC
ENT
8
SET