Icom IC-V82 Instruction Manual page 36

6
MEMORY/CALL OPERATION
D Memory/call ➾ memory/call
qSelect the memory (call) channel
to be transferred:
➥ Push [C•
] (or [B•
MR
select the memory (call) mode.
➥ Push [Y Y ] or [Z Z ] to select the
memory channel.
• When [VOL] is assigned as tuning
dial, rotate [VOL] to select the
memory channel. (pgs. 14, 65)
wPush [A•
], then push [C•
FUNC
momentarily.
• "--" and " X " blink.
ePush [Y Y ] or [Z Z ] to select the target memory.
• When [VOL] is assigned as tuning dial, rotate [VOL] to select
the target channel. (pgs. 14, 65)
r Push [A•
], then push and hold [C•
FUNC
• Memory mode is selected and the contents are transferred to the
target memory.
24
]) to
CALL
]
MR
] for 1 sec.
MR
D Clearing a memory
qPush [A•
], then push [C•
FUNC
to enter the memory transfer
mode.
• " X " and a memory channel num-
ber blink.
wPush [Y Y ] or [Z Z ] to select the
memory channel to be cleared.
C
MR
• When [VOL] is assigned as tuning
B
dial, rotate [VOL] to select the
CALL
memory channel. (pgs. 14, 65)
A
FUNC • The call channel cannot be cleared.
ePerform the following operation within 1.5 sec, otherwise
the transceiver returns to the memory mode without clear-
ing the memory.
- Push [A•
FUNC
- Push [A•
FUNC
• The contents of the selected memory are cleared.
r Push [D•
] to return to regular operation.
CLR
]
MR
], then push [C• ] momentarily.
MR
], then push and hold [C• ] for 1 sec.
MR
C
MR
A
FUNC