FLIR ThermoVision Micron User Manual page 31

ThermoVision® Micron/A10 User's Guide 412-0006-10 Version 130
current camera state correctly. For example, use Refresh if you connect the Omega camera
to the PC after the Control Panel software is already running.
Comm. The Comm. command provides the ability to specify a different Comm Interface and
port for camera communication. Use Comm. if you change interface or ports during
operation.
Image. The Image. command provides the ability to view both 8-bit and 14-bit images from
the camera as well as save images to either a 8-bit BMP or 16-bit TIFF format file. When
running in 14-bit mode, images can be viewed with or without a linear AGC applied (see
Figure 26). If using the Firewire module 16-bit TIFF sequences can be saved to file. Again,
please note that the 14-bit data is essentially *raw* data and will appear to be black when
saving 16-bit TIFF files
About. The last item on the menu bar is the About command. This command opens an
information window that displays the Control Panel version number, the camera serial
number, and the camera version number, as depicted in Figure 27.
Figure 26: Image Display
31