FLIR ThermoVision Micron User Manual page 18

ThermoVision® Micron/A10 User's Guide 412-0006-10 Version 130
Figure 16: IEEE-1394 Cable connect to Firewire Module
12. Assuming the Control Panel software is already installed on the PC (see installation
instructions above), execute the software.
13. The Control Panel software will attempt to automatically identify the port upon which the
camera is installed. If the Control Panel successfully links to the camera, skip ahead to
the section below titled "Operation of the Micron/A10 Control Panel".
14. If you see the window shown in Figure 10, verify that the Firewire Module LED is
powered on and connected to the PC. Then select the IEEE-1394 Comm interface option
and appropriate COM port then hit the "Apply" button. If the Control Panel successfully
links to the camera, skip ahead the section below titled "Operation of the Micron/A10
Control Panel".
18