FLIR ThermoVision Micron User Manual page 3

ThermoVision® Micron/A10 User's Guide 412-0006-10 Version 130
Cautions:
• Do not remove the camera cover. Disassembly of the camera (including removal of the
cover) can cause permanent damage and will void the warranty.
• Operating the camera outside of the specified input voltage range or the specified
operating temperature range can cause permanent damage.
• The camera is not sealed. Avoid exposure to dust and moisture and replace the lens cap
when not in use.
• Do not image extremely high intensity radiation sources, such as the sun, lasers, arc
welders, etc.
• The camera is a precision optical instrument and should not be exposed to excessive
shock and/or vibration. Refer to the Product Specification (ISC doc. 102-0005-09) for
detailed environmental requirements.
• This camera contains static-sensitive electronics and should be handled appropriately.
• If you have questions that are not covered in this manual, or need service, contact
Customer Support at (805) 964-9797 for additional information prior to returning a
camera.
3