Set Mode; I Set Mode Programming; D Set Mode Operation - Icom iM304 Instruction Manual

7

SET MODE

I Set mode programming

Set mode is used to change the conditions of the trans-
ceiver's functions: Scan type (Normal or Priority,) Scan re-
sume timer, Weather alert, Dual/Tri-watch, DSC watch, Beep
tone, Auto acknowledgement and Favorite channel function.
Available functions may differ depending on dealer setting.
D Set mode construction
• Scan type
Starting item
• Favorite channel function
28
• Scan resume timer
• Auto acknowledgement
Scrolls

D Set mode operation

q Turn power OFF.
w While pushing [!6 ] , turn power ON to enter Set mode.
e After the display appears, release [!6 ] .
• " " appears at the channel comment indicator.
r Push [!6 ] to select the desired item, if necessary.
t Push [Y] or [Z] to select the desired condition of the item.
y Turn power OFF, then ON again to exit Set mode.
• Weather alert
Push
• Beep tone
Scrolls
• Dual/Tri-watch
• DSC watch
Scrolls