I Dsc Address Id - Icom iM304 Instruction Manual

6
DSC OPERATION

I DSC address ID

A total of 30 DSC address IDs (9-digit) can be programmed
and named with up to 5 characters.
D Programming address ID
q Push [DSC] to enter the DSC menu.
w Push [Y] or [Z] to select "
e Push [Y] or [Z] to select "
14
," and push [DSC].
Scrolls
," and push [DSC].
r Push [Y] or [Z] to input 9-digit of the appropriate address
ID.
• Push [!6 ] or [CH/WX] to move the cursor forward or backward,
respectively.
• Push [SCAN] to cancel and exit the condition.
1st digit '0' is fixed for a group ID. When you input 1st digit '0'
and other 8 digits, the ID is automatically registered as a group
ID.
t After inputting 9-digit ID, push [DSC] to input 5 characters
ID name using [Y] or [Z].
• Push [!6 ] or [CH/WX] to move the cursor forward or backward,
respectively.
• Push [SCAN] to cancel and exit the condition.
y Push [DSC] to program and exit the DSC menu.