Icom iM304 Instruction Manual page 28

6
DSC OPERATION
D Transmitting Position Request call
Transmit a Position Request call when you want to know a
specified ship's current position, etc.
q Push [DSC] to enter the DSC menu.
w Push [Y] or [Z] to select "
e Push [Y] or [Z] to select the desired pre-programmed in-
dividual address.
• The ID code for position request must be set in advance. (p. 14)
22
," then push [DSC].
Scrolls
r Push [DSC] to enter the standby condition for Position Re-
quest call.
• Channel 70 is selected and "
t Push [DSC] to transmit the Position Request call.
While transmitting
y After the Position Request call has been transmitted, the
following indication is displayed.
• " " scrolls at the channel comment indicator.
u Push any key to exit the condition and return to the normal
operation.
" appears.
Scrolls