Icom iM304 Instruction Manual page 36

7
SET MODE
D D DSC watch
DSC watch monitors Channel 70 while you are receiving an-
other channel.
If a distress signal is received on Channel 70, the transceiver
monitors Channel 16 and 70 alternately until the distress sig-
nal disappears. If a signal is received on another channel,
DSC watch pauses until the signal disappears.
This function may not be available for some channel
groups depending on dealer setting.
• " " scrolls at the channel comment indicator.
DSC watch OFF (default)
D D Beep tone
You can select silent operation by turning beep tones OFF or
you can have confirmation beeps sound at the push of a key
by turning beep tones ON.
Beep tone ON (default)
30
D D Automatic acknowledgement
This item sets the Automatic acknowledgement function ON
or OFF.
When Position Request call or Position Report call is re-
ceived, transceiver automatically transmits Position Request
Reply call or Position Report Reply call, respectively.
• "
Auto acknowledgement
D D Favorite channel
This item sets the Favorite channel function ON or OFF.
DSC watch ON
The favorite channel is programmed by the TAG channel set-
ting (p. 11).
When the Favorite channel function is turned ON, [Y Y ]/[Z Z ]
keys on the microphone select the favorite channels in the
selected channel group in sequence when pushed.
•
"
Beep tone OFF
Favorite CH ON (default)
" scrolls at the channel comment indicator.
OFF (default)
" scrolls at the channel comment indicator.
Auto acknowledgement
ON
Favorite CH OFF