The LOAD Page
The LOAD button calls up the LOAD page where you can load compatible files from a
storage device.
Before you press the LOAD selection button in StorageMode, make sure you have plugged
the USB device containing your User Programs and/or Multis into the back of the Forte.
If your User Programs/Multis are located on your computer or Tablet, then use the cable that
plugs into the computer/Tablet USB port on the rear panel of the Forte.
If your User Programs/Multis are located on a USB flash drive, plug them into the Device
USB port on the rear panel of the Forte.
NOTE :
If the Forte is currently connected to your computer as
a MIDI controller, Saving or Loading a fi le in the PC Virtual Drive
will temporarily disconnect the Forte USB MIDI connection for
approximately 1 second. After Saving or Loading, the Forte may
need to be reselected as a MIDI device in your computer program.
Loading or Saving to the Flash Drive will not disconnect the USB MIDI
connection.
Storage Mode
The LOAD Page
11-7