Load (Overwrite) - Kurzweil Artis SE Musician's Manual

Load (Overwrite)?

Load (Overwrite)?
The
User Programs and User Multis from a device connected to the Artis SE via USB. Selecting
Load (Overwrite)?
and deletes (overwrites) the existing User Programs and Multis currently in the Artis SE. If
there are fewer objects in the file than are currently stored in User locations, the additional
locations will be emptied.
+
Press the button to begin the process of loading from the selected device (USB or PC).
If the device is not attached or not recognized, the display will prompt you to connect the
selected device or unplug and reconnect it. Follow the instructions on the display. If PC
was selected for the Device option, then the Artis SE will appear as a removable disk/drive
on your computer. Copy the file, containing your previously saved User Programs and User
Multis, from your computer into the Artis SE removable disk/drive. If USB was selected for
the Device option, use the Param/Channel ▲ or ▼ buttons to select the file to load from the
list of files on the Artis SE display.
Press Assign, and a warning message will appear before executing the Overwrite:
Pressing Assign again will load the file; pressing Exit (or the
process without overwriting the current files, and return to the
option.
When loading new files the display shows
File loaded
If no file is in the Artis SE temporary drive during the load or an error occurs during the
load operation, then the display will show the error message,
specifying the reason for the error.
option allows you to load a file containing previously saved
loads the previously saved User Programs and User Multis
Copy file to drive
After Press [Assign]
Overwrite can delete
Are you sure?[Assign
.
–
button) will cancel the
Load (Overwrite)?
File Loading...
Load Error
Storage Mode
, and when complete
and a message
10-3