Advantech AIMB-213 User Manual page 53

3.2.3.4 Allocate IRQ to PCI VGA
When set to Yes, will assign IRQ to PCI VGA card if card requests IRQ. When set to
No will not assign IRQ to PCI VGA card even if card requests an IRQ.
3.2.3.5 Palette Snooping
This item is designed to solve problems caused by some non-standard VGA card.
3.2.3.6 PCI IDE BusMaster
When set to enabled, BIOS uses PCI busmastering for reading/writing to IDE drives.
3.2.3.7 OffBoard PCI/ISA IDE Card
Some PCI IDE cards may require this to be set to the PCI slot number that is holding
the card. Set to Auto works for most PCI IDE cards.
3.2.3.8 IRQ3 / 4 / 5 / 7 / 9 / 10 /11
This item allows you respectively assign an interrupt types for IRQ-3, 4, 5, 7, 9, 10,
11.
3.2.3.9 DMA Channel0 / 1 / 3 / 5 / 6 / 7
When set to Available, will specify DMA is available to be used by PCI/PnP devices.
When set to Reserved, will specified DMA is Reserved for use by legacy ISA devices.
3.2.3.10 Reserved Memory Size
This item allows you to reserve a set amount of memory for legacy ISA devices.
41
Data Modul AG - www.data-modul.com
AIMB-213 User Manual