Titan SF2541 Safety And Operating Manual page 5

ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR MITRE
SAW
1.Do not use saw blades, which are damaged or deformed.
2.Replace the table insert when worn.
3.Use only saw blades in these instructions and which conform to en 847-1.
4.Do not use saw blades manufactured from high speed steel.
5.Wear suitable personal protective equipment when necessary, this could include.
6.Connect the saw to a dust collecting devise when sawing wood.
7.Eye protection.
8.Respiratory protection to reduce the risk, of inhalation of harmful dust.
9.Gloves for handling saw blades (saw blades shall be carried in a holder wherever
practicable) and rough material.
10.Connect the saw to a dust collecting device when sawing wood.
11.Select the correct saw blade for the material to be cut.
12.Do not use the saw to cut other materials than those recommended by the manu-
facturer.
13.Do not use the saw without the guards in position, in good working order and
properly maintained.
14.Ensure that the arm is securely fixed when bevelling.
15.Keep the floor area around the machine level, well maintained and free of loose
materials e.g. chips and cut-offs.
16.Provide adequate general or localised lighting;
17.All personnel operating this machine must read these instructions and familiarise
themselves with the machines workings.
18.Use correctly sharpened saw blades. Observe the maximum speed marked on the
saw blade.
19.Ensure that any spacers and spindle rings used are suitable for the purpose as
stated by the manufacturer.
20.Retrain from removing any cut-offs or other parts of the workpiece from the cutting
area whilst the machine is running and the saw head is not in the rest position.
21.Ensure that the machine is always fixed to a bench, wherever possible.
10" MITRE SAW SF2541