Table of Contents
Advertisement
#help Command
The #help command displays help on the specified command. If param1 is not
specified, then the full list of commands is displayed.
Syntax:
#help [param1]
Parameters:
param1
Example:
#help #callpreset
Cmd #callpreset: Recall a routing and mask state preset
Syntax: #callpreset param1
Param1 = 1-8 (preset)
e.g: #callpreset 2
#lock_fo Command
The #lock_fo enables/disables the power lock state. Enabling this feature will
store the +5V status for each input prior to shutting down the matrix. This pre-
serves the +5V state when the unit is restarted.
Syntax:
#lock_fo param1
Parameters:
param1
Example:
#lock_fo 0
Disable Lock power mode
TELNET / RS-232 COMMANDS
Command name
State
Value
Meaning
0
Disable power lock
1
Enable power lock
45
[0 - 1]
Advertisement
Table of Contents
