Gefen Pro GEF-DVI-848DL User Manual page 34

8x8 dvi dual link matrix
Table of Contents

Advertisement

TELNET / RS-232 COMMANDS
#resetip Command
The #resetip command resets all TCP/IP settings to factory defaults.
Syntax:
#resetip
Parameters:
None
Notes:
The matrix must be rebooted after executing this command.
Example:
#resetip
Reset ip configuration to factory default
#set_http_port Command
The #set_http_port command sets the Web server listening port.
Syntax:
#set_http_port param1
Parameters:
param1
Port
[0 - 65535]
Notes:
The default port setting is 80.
The matrix must be rebooted after executing this command.
Example:
#set_http_port 34
New HTTP port set to: 34
30

Advertisement

Table of Contents
loading

Table of Contents