Gefen Pro GEF-DVI-848DL User Manual page 36

#set_telnet_username Command
The #set_telnet_username command sets the Telnet user name. The maximum
length of the user name is 20 characters. The user name is case-sensitive.
Syntax:
#set_telnet_username param1
Parameters:
param1
Notes:
The default username is Admin.
The matrix must be rebooted after executing this command.
Example:
#set_telnet_username andrew
Telnet login updated to: andrew
#sgateway Command
The #sgateway sets the IP gateway (router) address. Dot-decimal notation must
be used when specifying the IP address. The default address is 192.168.1.254.
Syntax:
#sgateway param1
Parameters:
param1
Notes:
The default gateway IP address is 192.168.1.254
The matrix must be rebooted after executing this command.
Example:
#sgateway 192.168.1.1
New IP Gateway set to: 192.168.1.1
TELNET / RS-232 COMMANDS
User name
IP gateway
32