Table of Contents
Advertisement
TELNET / RS-232 COMMANDS
#show_ver_data Command
The #show_ver_data command displays the hardware and firmware version of
the matrix.
Syntax:
#show_ver_data
Parameters:
None
Example:
#show_ver_data
Hardware version 1
Firmware Release version 2.0.33
Release data: Jun 17 2012
Release time: 16:50:58
Boot loader version 1.6
#sipadd Command
The #sipadd command sets the IP address of the matrix. Dot-decimal notation
must be used when specifying the IP address.
Syntax:
#sipadd param1
Parameters:
param1
IP address
Notes:
The matrix must be rebooted after executing this command.
Example:
#sipadd 192.168.1.72
New IP set to: 192.168.1.72
34
Advertisement
Table of Contents
