Table of Contents
Advertisement
#ediddstolo Function
The #ediddstolo function reads the downstream EDID and stores it to a Local
EDID input. Up to eight inputs can be specified, beginning with param2.
Syntax:
#ediddstolo param1 param2 [param3...param9]
Parameters:
param1
param2
Notes:
If param2 = 0, then the downstream EDID is stored to all 8 DVI inputs.
If additional inputs are specified, then they are ignored.
Examples:
#ediddstolo 2 3
Finished reading EDID from output 2
Finished loading EDID to local 3
#ediddstolo 2 0
Finished reading EDID from output 2
Finished loading EDID to local 1
Finished loading EDID to local 2
Finished loading EDID to local 3
Finished loading EDID to local 4
Finished loading EDID to local 5
Finished loading EDID to local 6
Finished loading EDID to local 7
Finished loading EDID to local 8
TELNET / RS-232 COMMANDS
A downstream monitor
Input list
22
[1 - 8]
[0 - 8]
Advertisement
Table of Contents
