Table of Contents
Advertisement
TELNET / RS-232 COMMANDS
#ediddetolo Function
The #ediddetolo function stores the Default EDID (640x480) in the specified
Local EDID input. Up to eight inputs can be specified.
Syntax:
#ediddetolo param1 [param2...param8]
Parameters:
param1
Input
[0 - 8]
Notes:
If param1 = 0, then all 8 DVI inputs will be set to the Default EDID. If additional
inputs are specified, then they are ignored.
Examples:
#ediddetolo 7
Finished loading EDID to local 7
#ediddetolo 0
Finished loading EDID to local 1
Finished loading EDID to local 2
Finished loading EDID to local 3
Finished loading EDID to local 4
Finished loading EDID to local 5
Finished loading EDID to local 6
Finished loading EDID to local 7
Finished loading EDID to local 8
20
Advertisement
Table of Contents
