Table of Contents
Advertisement
TELNET / RS-232 COMMANDS
#fadefault Command
The #fadefault command disables the EDID lock state, sets the default routing
state (1-1, 2-2, 3-3, etc.) and resets the input and output names to the default
names (e.g. Output 1, Input 1).
Syntax:
#fadefault
Parameters:
None
Example:
#fadefault
Return to factor default
Loading default EDID
Routed 1-1, 2-2..
Finished loading EDID to local 1
Finished loading EDID to local 2
Finished loading EDID to local 3
Finished loading EDID to local 4
Finished loading EDID to local 5
Finished loading EDID to local 6
Finished loading EDID to local 7
Finished loading EDID to local 8
44
Advertisement
Table of Contents
