Table of Contents
Advertisement
#edidbatolo Command
The #edidbatolo command reads the downstream EDID and stores it to any local
input. Up to eight inputs can be specified, beginning with param2.
Syntax:
#edidbatolo param1 param2 [param3...param9]
Parameters:
param1
param2
Notes:
If param2 = 0, then the EDID in the specified bank is copied to all eight inputs.
If additional inputs are specified, then they are ignored.
Examples:
#edidbatolo 2 3
Finished reading EDID from bank 2
Finished loading EDID to local 3
#edidbatolo 3 0
Finished loading EDID to local 1
Finished loading EDID to local 2
Finished loading EDID to local 3
Finished loading EDID to local 4
Finished loading EDID to local 5
Finished loading EDID to local 6
Finished loading EDID to local 7
Finished loading EDID to local 8
TELNET / RS-232 COMMANDS
EDID bank
Input
19
[1 - 3]
[0 - 8]
Advertisement
Table of Contents
