HIKVISION DS-7200HVI-ST User Manual page 75

2. Select the Patrol button to enter the Patrol Management menu, shown in Figure 5.
Figure 5. Patrol Management Menu
3. In the Patrol Management menu, you may:
• Configure Patrol:
1. Select a Patrol Number to set.
2. Select valid presets (See Customize Presets) and click the Set button to enter the Patrol
configuration menu. A sequence should have at least 2 valid presets.
3. Set the Key Point No., Duration, and Speed (Figure 6). The Key Point No. determines the
order at which the PTZ will follow while cycling through the patrol. The Duration refers to
the time span to stay at the corresponding key point. The Speed defines the rate at which the
PTZ will move to the current preset.
Figure 6. Patrol Configuration Menu
4. Click OK to return to Patrol Management menu and repeat steps 2-3 to configure other key
points.
5. After all key points have been configured, click the defined key point No. and then click Add
button to complete the settings.
6. Click OK button to save settings and exit the current menu.
• Clear Patrol:
1. Select a valid Patrol Number.
2. Click the Clear button to delete patrol.
• Call Patrol:
1. Select a valid Patrol Number.
74