Configuring Server And Http Ports - HIKVISION DS-7200HVI-ST User Manual

4. Set Multicast IP, as shown in Figure 10. When adding a device to the Network Video Surveillance
software, the multicast address must be the same with the DVR's multicast IP.
Figure 10. Host/Others Menu
5. Click OK to save settings and exit the Host/Others menu.

Configuring Server and HTTP Ports

If you would like to change the server and HTTP ports from the default settings, you can do so in the Network Settings
menu. The default server port is 8000 while the default HTTP port is 80.
To change the default ports:
1. Click Menu > Settings > Network to enter the Network Settings menu.
2. Select the Advanced tab.
3. Click the Set button next to Host/Others to enter the Host/Others menu.
4.
Enter new Server Port and HTTP Port, as shown in Figure 11.
Figure 11. Host/Others Menu
Note:
The Server Port has a port range of 2000-65535 and is used for remote client software access. The HTTP port
is used for remote Internet browser access.
69