default settings are resumed; and if you select the checkbox as
Wizard dialog box when it starts up next time.
Figure 2. Setup Wizard
To start using the Setup Wizard:
1.
Click the Next button on the Wizard window. This will take you to the User Permission window,
shown in Figure 3.
Figure 3. User Permission
2.
Navigate to the Admin Password text box.
3.
Type the admin password into the Admin Password text box. By default, the password is 12345.
4.
To change the admin password, check the New Admin Password checkbox. Type new password and
confirm it in the given text boxes.
5.
Click Next button to enter the HDD Management dialog box, shown in Figure 4.
, the device will automatically access the Setup
24