Configuration Setting Over Telnet - Lucom ER 75i User Manual

5.

Configuration setting over Telnet

Attention! If the SIM card isn't included in the router, it is impossible for the router to
operate. The Included SIM card must be activated for GPRS transmissions. Insert the SIM
card when the router is switched off.
Monitoring of status, configuration and administration of the router can be performed by
means of the Telnet interface. After IP address entry to the Telnet interface it is possible to
configure the router by the help of commands. The default IP address of the modem is
192.168.1.1. Configuration may be performed only by the user "root" with initial password
"root".
For Telnet exists the following commands:
Command
cat
cp
date
df
dmesg
echo
email
free
gsmat
gsminfo
gsmsms
hwclock
ifconfig
io
ip
iptables
kill
killall
ln
ls
mkdir
mv
ntpdate
passwd
ping
ps
pwd
reboot
rm
rmdir
route
service
sleep
slog
tail
tcpdump
touch
vi
90
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de
Description
file contain write
copy of file
show/change of system time
displaying of informations about file system
displaying of kernel diagnostics messages
string write
sends an e-mail
displaying of informations about memory
AT commend send
displaying of informations about signal quality
SMS send
displaying/change of time in RTC
displaying/change of interface configuration
reading/writing input/output pins
displaying/change of route table
displaying/modification of NetFilter rules
process kill
processes kill
link create
dump of directory contain
file create
file move
synchronization of system time with NTP server
password change
ICMP ping
displaying of processes information
dump of actual directory
restart
file delete
directory delete
displaying/change of route table
start/stop of service
pause on set seconds number
displaying of system log
displaying of file end
monitoring of network
file create/actualization of file time stamp
text editor
CONFIGURATION