Dhcp Status; Ipsec Status; Gprs Status - Lucom ER 75i User Manual

4.2. DHCP Status

Information about IP addresses, which was leased to the router by the DHCP server,
is possible to find in menu in sum DHCP:
•
lease 192.168.1.2 (generally IP address) – assigned IP address
•
starts – information about time of assignation of IP address
•
ends – information about time of termination IP address validity
•
hardware ethernet – hardware MAC (unique) address
•
uid – unique ID
In the extreme the DHCP status can display two records for one IP address. That
could have been caused by resetting of network cards.

4.3. IPsec status

Information on actual IPsec tunnel state can be called up in option IPsec in the menu.
Detailed information on the description shown below can be found on the following link
http://www.freeswan.org/doc.html.

4.4. GPRS Status

The item GPRS in the menu contains up-to-date information about PLMN (code of
operator), cell, channel and signal quality of the selected cell, as well as neighboring hearing
cells. In the middle part of window is shows information about transferred data in accounting
period. The GPRS Connection Log is in the bottom of this window where information about
the make-up of the GPRS connection is and pertinent problems on this formation.
Information about transferred data is show when the parameter Data Limit is set
(GPRS configuration) and it set parameter (Switch to backup SIM card hen data limit to
exceeded); or when the parameter Data Limit is set (GPRS configuration) and it set
parameter Send SMS when data limit is exceeded (SMS configuration). Information about
transferred data is show for primary SIM card only.
34
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de
CONFIGURATION