Nat Configuration - Lucom ER 75i User Manual

4.11. NAT Configuration

To enter the Network Address Translation configuration, select the NAT menu item.
By checking
the Default Server item it is possible to put the router into the mode in which all incoming data
from GPRS will be routed to the computer with the defined IP address.
If the Enable remote HTTP access field and port number is filled in, then configuration
of the router over web interface is possible. Choice Enable remote FTP access on port and
port number makes it possible to access over FTP. Choice Enable remote Telnet access and
port number makes it possible to access over Telnet. Choice Enable remote SNMP access
and port number makes it possible to access to SNMP agent. Choice Masquerade outgoing
packets option turns the system address translation NAT.
The changes in settings will apply after pressing the Apply button.
47
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de
off the Send all incoming packets to
CONFIGURATION
default server item and setting