Selectable Fields - Wegener iPUMP6400 User Manual

iPump6400 User's Manual
Selectable Other user-input screens allow choosing from a list of options. Here is an
Fields example of a user-input screen with a selectable field.
When you reach the screen, the current selection is displayed. To change your
selection:
NOTE: Front-panel control is limited by a four-minute timeout period. After
four minutes without input from the front-panel push buttons, the iPump6400
LCD will automatically return to the home screen and any unsaved changes
will be lost.
800009-01 Rev. B
c) Press ENTER to confirm the first character. The first character is
displayed at the bottom left of the LCD.
d) Select additional characters as in steps b) and c) until the entire
filename is displayed completely at the bottom left of the LCD.
e) When the entire filename is shown, press ESC to stop editing. When
prompted, "Done?", press ENTER if the filename is correct or ESC to
continue editing your entry.
Figure 3.8 Selectable Field
a) Press ENTER to open the field. The current selection is highlighted.
b) Press the up or down arrow buttons to view available options one at a
time.
c) When the desired option is shown, press the ENTER button to save
that selection. Pressing ESC before pressing ENTER will cancel any
change.
38 wegener.com