Web Browser Operations Startup - Wegener iPUMP6400 User Manual

iPump6400 User's Manual
Web Browser For HTML control and status checking from a web browser, first navigate
Operations from the home screen to the IP Setup screen. (iPump6400 operations per-
Startup formed via a web browser are described under 3.6 iPump6400 Operations by
Function.)
Press ENTER and take note of the iPump6400's IP address displayed on the
screen. Then use the following steps to gain control from your web browser:
NOTE: It may be necessary to set the IP address, subnet mask, and gateway to
specific values - consult your local network administrator. Include leading
zeros in addresses entered from the iPump6400 front panel, but not when
entering them from the browser interface.
800009-01 Rev. B
Step Press
a)
ENTER
b)
c)
d)
e)
a) Open a current-version internet browser from a computer on the LAN
attached to your iPump6400.
b) In the browser's address field, enter the IP address noted from the IP
Address screen and the Status tab of the iPump6400 web interface
will appear.
Displayed
UNIT SETUP
RECORD AND PLAY
DECODER SETUP
AUDIO SETUP
IP SETUP
34
Screen Type
Menu
Menu
Menu
Menu
Menu
wegener.com