Wegener iPUMP6400 User Manual page 21

Your iPump6400 is sized at 2 RU and will fit an EIA-standard, 19-inch-wide
equipment rack (See "Size" on page 15.).
The front brackets must be secured to the rack. If front brackets are left
unsecured, the unit may shift forward and fall from the rack during installation
or operation. Failure to secure the front brackets may result in personal injury
and/or damage to the equipment.
Locate the iPump6400 and its cables to avoid impacts, spills, and pulling
cables and to ensure sufficient air flow. Failure to locate the iPump6400 in a
proper environment may result in damage to the equipment.
wegener.com
a) First, install angle brackets or cross-supports capable of supporting
both the unit and its connecting cables. Screw or bolt the supports
securely to the equipment rack.
b) Place the iPump6400 on its supports and use four anchor screws or
bolts and nuts to secure the unit's front brackets to the rack.
iPump6400 User's Manual
WARNING
WARNING
21 800009-01 Rev. B B B B