Table of Contents
Advertisement
This chapter provides instructions on unpacking, mounting, and connecting
your iPump6400 as well as connector information including detailed pinouts.
2.1 Unpacking and Inspection
Carefully unpack the unit and its ac power cord and inspect for obvious signs
of physical damage that might have occurred during shipment. Also locate the
bag of accessories including 1/8-to-RCA and SVD-to-RCA adapters. Any
damage claims must be reported to the carrier immediately. Be sure to check
the package contents carefully for important documents and materials.
NOTE: Please save the packing materials and original shipping containers in
case you must later return the unit for repair. Packing these units in other
containers in such a way that they are damaged will void your warranty.
2.2 Location and Mounting
The iPump6400 should be mounted in a standard 19-inch equipment rack.
After mounting, maintain a clean, dry environment for the unit.
This is a Class A product. In a domestic environment this product may cause
radio interference for which the user may need to take mitigating action.
wegener.com
Chapter 2 Installation
WARNING
19
800009-01 Rev. B
Advertisement
Table of Contents
