Selectable Fields - Wegener iPump User Manual

iPump User's Manual
c) Press ENTER to confirm the first character. The first charcter is
d) Select additional characters as in steps b) and c) until the entire
e) When the entire filename is shown, press ESC to stop editing. When
Selectable Other user-input screens allow choosing from a list of options. Here is an
Fields example of a user-input screen with a selectable field.
When you reach the screen, the current selection is displayed. To change your
selection:
a) Press ENTER to open the field. The current selection is highlighted.
b) Press the up or down arrow buttons to view available options one at a
c) When the desired option is shown, press the ENTER button to save
NOTE: Front-panel control is limited by a four-minute timeout period. After
four minutes without input from the front-panel pushbuttons, the iPump LCD
will automatically return to the home screen and any unsaved changes will be
lost.
800009-01 Rev. A
displayed at the bottom left of the LCD.
filename is displayed completely at the bottom left of the LCD.
prompted, "Done?", press ENTER if the filename is correct or ESC to
continue editing your entry.
Figure 3.8 Selectable Field
time.
that selection. Pressing ESC before pressing ENTER will cancel any
change.
30 wegener.com