Table of Contents
Advertisement
Fan removal
Note: The illustrations in this documents might differ slightly from your hardware.
To remove the fan, do the following:
1. Power-off the system.
2. Unplug the system.
3. Remove the cover (see "Removing the cover and front bezel" on page 47).
4. Disconnect the fan from the system board.
5. Remove the full length PCI cards.
6. Remove the air duct by pushing the blue push pins (2) outward.
7. Pull the (2) blue push pins on the top corners of the assembly.
8. Lean fan bracket assembly towards rear of the computer and pull out.
Note: Before performing any removals, read "Safety information" on page 103 and "Before
you begin" on page 43.
FRU information (service only)
75
Advertisement
Table of Contents
