Logic Card Fan Removal And Replacement Procedures - IBM System/36 Maintenance Information Manual

310 Logic Card Fan Removal and Replacement Procedures
To remove the fan:
1. Power off the 5363 and disconnect the power cord at the customer power outlet and the 5363.
2. Remove the covers ("305 Cover Removal" on page 3-2).
3. Remove the fan airflow cover.
4. Support the fan and remove the 4 screws.
5. Slide the fan and spacer out of the 5363 frame.
6. Disconnect the fan power connector.
3-4
5363 Maintenance Information