Table of Contents
Advertisement
16. When you tighten the screws to secure the heatsink, alternate between the two
17. Reinstall the air baffle.
18. Reinstall the memory board.
19. Replace the cover (see "Replacing the cover and connecting the cables" on
Security U-bolt
To help prevent hardware theft, a security U-bolt is attached to the chassis of the
computer. To secure the computer, thread a security cable through the U-bolt and
around an object that is a not part of or permanently secured to the building
structure or foundation, and from which it cannot be removed; then, fasten the cable
ends together with a lock. Ensure that the security cable does not interfere with
other cables that are connected to the computer.
64
Hardware Maintenance Manual: IBM IntelliStation M Pro Type 6233 and 6850
Microprocessor
screws. That is, tighten one screw a little then tighten the other screw a little.
Continue switching between the screws until the heatsink is secured to the
microprocessor. Alternating the tightening of the screws can help prevent
damage to the microprocessor.
Attention:
Ensure that the screws are completely tightened, otherwise, the
system will not function properly.
page 65).
cover
Heatsink
Positioning notch
Microprocessor
Microprocessor
socket
Microprocessor
lever
Advertisement
Table of Contents
