Replacing The Cover And Connecting The Cables - IBM IntelliStation M Pro 6233 Hardware Maintenance Manual

Replacing the cover and connecting the cables

This section provides instructions on how to replace the cover and connect the
cables on the computer.
Note: The illustrations in this document might differ slightly from the hardware.
Complete the following steps to replace the cover and connect the cables:
1. Review the "Safety information" on page 103.
2. Ensure that all components have been reassembled correctly, and that no tools
3. Clear any cables that might impede the replacement of the cover.
4. Place the front bezel back onto the front of the chassis and snap it into place.
5. Slide the side cover into place on the chassis and lock the key-lock button.
6. Reconnect the external cables and power cords to the computer; then, plug the
7. Update the computer configuration. See "Updating the computer configuration"
Note: If an error message related to the chassis-intrusion detector appears after
or loose screws are left inside the computer.
power cords into properly grounded electrical outlets. Turn on the attached
devices and the computer.
on page 71.
you restart the computer, you must type the administrator password. For
more information, see "Using passwords" on page 36.
65
Installing options