Extron electronics HDMI DA2 User Manual page 30

Figure 13. Firmware Loader Screen with a HDMI DA2 Added
11. If you want to remove a device from the Devices section, do the following:
1.
Click on the names of the devices to be deleted, to highlight them.
2.
Select
Remove Selected Device(s)
3.
On the Remove Device(s) window, select or deselect any devices on the list as
desired, then click Remove
To remove all devices, select
12. Click . The following indicators show the progress of the update:
Begin
The Transfer Time section shows the amounts of remaining and elapsed time for
z
the update.
The Total Progress section displays a progress bar with
z
In the Devices section, the Progress column displays an incrementing percentage
z
and another progress bar. The Status column displays
13. The upload is complete when the
Progress column shows
in the field. Close the Firmware Loader window.
Status
from the
Edit
.
Remove All Devices
field shows
Remaining Time
, and is displayed above the progress bar and
100% Completed
HDMI DA2 • Updating Firmware
menu.
from the menu.
Edit
above it.
Uploading...
.
Uploading
, the
00.00.00
24