Extron electronics HDMI DA2 User Manual page 29

On the Add Device window, the path to the new firmware file is displayed in the
field.
Figure 12. Path to the New Firmware File on the Add Device Window
10. If this is the only device to which you are uploading firmware, click
HDMI DA2 information is added to the Devices section of the Firmware Loader
window and the Add Device window closes.
If you will be uploading the firmware to multiple HDMI DA2 units that are
connected to your computer, do the following:
a.
Click . Your first device is added to the Devices section of Firmware Loader
Add Next
window, and the Add Device window remains open.
b.
For each additional device you want to add to the Firmware Loader window, repeat
steps 5 through 9, then click
c.
For the last device, click
the Add Device window.
.
Add Next
(instead of ) to add the device and to close
Add Add Next
HDMI DA2 • Updating Firmware
Path
. The
Add
23