Extron electronics HDMI DA2 User Manual page 28

Distribution amplifier

Hide thumbs Also See for HDMI DA2:

Table of Contents

On the Open window, navigate to the new firmware file, which has an S19 extension,

and double‑click it.

Figure 11.

Open Window for Firmware File Selection

ATTENTION:

Valid firmware files must have the file extension S19. A file with any

other extension is not a firmware upgrade for this product and could cause the

HDMI DA2 to stop functioning.

NOTES:

The original factory‑installed firmware is permanently available on the

•

HDMI DA2. If the attempted firmware upload fails for any reason, the unit

reverts to the factory version.

•

When downloaded from the Extron website, by default the

firmware is placed in a folder at C:\Program Files\Extron\

Firmware\HDMI DA2 (Windows XP) or C:\Program Files (x86)\

Extron\Firmware\HDMI DA2 (Windows 7).

HDMI DA2 • Updating Firmware

Table of Contents

Need help?

Do you have a question about the HDMI DA2 and is the answer not in the manual?