Swiss Movado Operating Instructions Warranty & Service Manual page 8

STANDARD 3-HAND/DATE AND 3-HAND/DAY/DATE MODELS
Includes Datron, SE, and Series 800 Sub-Sea quartz watches, and Red Label and Series 800 Sub-Sea automatics
QUARTZ AND AUTOMATIC
Crown positions:
Position 1 – Normal running position.
Position 2 – To set DATE*:
Position 3 – To set TIME*:
*NOTE: If your watch has a screw-down crown, before
you can set the Date (Day/Date) or Time, you must
FIGURE 2
first unlock the crown by turning it counterclockwise
approximately six rotations. After Time/Date (Day/
Date) setting, the crown must be screwed back down
into the case to ensure water resistance
To manually wind an automatic movement:
The motion of your arm during normal daily activities
should be sufficient to keep the movement of your
Movado automatic timepiece wound. However, if you
have not worn your watch for 38 hours or more, and
the watch has stopped, you will need to wind it by
hand before setting the time:
1. With the crown in position 1, turn the crown
2. Reset time following instructions above.
FIGURE 3
7
Crown pushed into case.
Rotate crown clockwise.
To set DAY*:
Rotate crown counterclockwise.
Rotate crown in either direction.
clockwise approximately 20 revolutions.