1/10 Second - Type C - Swiss Movado Operating Instructions Warranty & Service Manual

LEGEND:
H – Hour hand
M – Minute hand
S – Small seconds hand
C – Chronograph 60-seconds counter
E – Chronograph 30-minutes counter
F – Chronograph tenths-of-a-second counter
D – Big Date window
1, 2, 3 – Crown positions
A – Chronograph push-button (start/stop)
B – Chronograph push-button (split-time/reset)
QUARTZ CHRONOGRAPH
1/10 SECOND – TYPE C
Includes Datron and Sapphire Synergy quartz chronographs
FIGURE 8A
FIGURE 8B
These chronograph models feature a minute
counter (up to 30), tenths-of-a-second counter which
becomes an hour counter after 30 minutes, and
small seconds hand subdials, and center-mounted
chronograph seconds hand; some have a Big Date
feature. They can be used to time an event up to
29 minutes and 59.9 seconds in duration to the
nearest 1/10 of a second; or up to 9 hours, 59
minutes and 59 seconds in duration to the nearest
full second.
TIME/DATE SETTING
To set the time:
1. Pull crown out to position 3; watch stops.
2. Turn crown in either direction until hands indicate
desired time.
3. Push crown back in to position 1; watch restarts.
To adjust the time to the exact second:
1. As soon as small seconds hand S reaches <<60>>
position, pull crown out to position 3; watch stops.
2. Turn crown to move hands and set time, making
sure date changes at midnight, not noon.
3. Move hands slightly ahead of exact time, then
slowly turn crown counterclockwise to align minute
hand with correct minute marker.
4. Take an accurate time signal (from a radio news
station, for example). When audible tone signals
exact time, immediately push crown back in to
position 1; watch will restart, now set to the
exact time.
To correct the Big Date (quick mode):
Only for models with Big Date feature at 12 o'clock
(see Figure 8A)
1. Pull crown out to position 2; watch continues to run.
2. Turn crown clockwise until correct date appears in
big date window D.
3. Push crown back in to position 1.
18