Table of Contents
Advertisement
Ceiling (%)
The address format of the receiving end, such as VLC, is: rtp: //@[ip]: [port no.].
According to this case, the format is: rtp: //@234.255.0.90: 9500
4.4.5
RTSP Parameter Settings
Click on "RTSP config" in the page "streams" to set advanced parameters of RTSP.
Item
Server port
number
Copyright © Shenzhen Reach Tech Co., Ltd.24 / 33
from the encoder from exceeding a certain limit.
Ceiling is the limit parameter for setting the peak
bandwidth, which can be set within the range of
1~100 (%). If the encodingcode rate is set to
2Mbps, the ceiling (%) is set to 10 and the upward
fluctuation of network packets will not exceed
200Kbps.
Description
This allows you to set the TCP communication port
between the encoder and the receiving end, which
is 554 by default, and the modification will take
REACH ENC1260
User's Manual
Advertisement
Table of Contents
