Rtp Setting - Reach ENC1260 User Manual

Item
IP Input Multicast IP (only Multicast IPs are supported here, with the range
from 224.0.0.0 to 239.255.255.255).
Video port Input port number. Common for video and audio.
Audio port n/a
MTU Maximum Transmission Unit, range: 228~1500 bytes.
TTL Range: 1~255, and the value must be bigger than 1 during cross-segment
transmission.
TOS Different TOSs can be set when supported by the transmission device.
TC Traffic Control,prevents the network packets sent from the encoder from
exceeding a certain limit.
Ceiling (%) Ceiling is the limit parameter for setting the peak bandwidth, which can be
set within the range of 1~100 (%). If the encodingbit rate is set to 2Mbps, the
ceiling (%) is set to 10 and the upward fluctuation of network packets will not
exceed2.2Mbps.
The address format of the receiving end, such as VLC, is: udp: //@[ip]: [port no.]. In this
sample it should be: udp: //@234.255.0.90: 9500
4.4.2

RTP Setting

Select RTP from the "Protocal" field.
Copyright © Shenzhen Reach Tech Co., Ltd.19 / 33
Description
REACH ENC1260
User's Manual