Reach ENC1260 User Manual page 20

Item
IP Input Multicast
224.0.0.0 to 239.255.255.255
Video port Video input port number, which should be an even number. Video input port number, which should be an even number
Audio port Audio input port number, which should be an even number.
MTU Maximum Transmission Unit Maximum Transmission Unit, range: 228~1500 bytes.
TTL Range: 1~255, and the value must be bigger
transmission.
TOS Different TOSs can be set when supported by the transmission device. Different TOSs can be set when supported by the transmission device. Different TOSs can be set when supported by the transmission device.
TC Traffic Control,
exceeding a certain limit. exceeding a certain limit.
Ceiling (%) Ceiling is the limit parameter for setting the peak bandwidth, which can be set Ceiling is the limit parameter for setting the peak bandwidth, which can be set Ceiling is the limit parameter for setting the peak bandwidth, which can be set
within the range of 1~100 (%). If the encoding code rate is set to within the range of 1~100 (%).
ceiling(%) is set to 10 and the upward fluctuation of network packets will not
exceed200Kbps
Note:
1. When using applications like When using applications like VLC, it is required to open the sdp
Copyright © Shenzhen Reach Tech Co., Ltd. Copyright © Shenzhen Reach Tech Co., Ltd.20 / 33
cast IP (only Multicast IPs are supported here, with the range from
239.255.255.255) or the IP address of the receiving end
input port number, which should be an even number.
5, and the value must be bigger than 1 during cross
,prevents the network packets sent from the encoder from revents the network packets sent from the encoder from
is set to 10 and the upward fluctuation of network packets will not is set to 10 and the upward fluctuation of network packets will not
200Kbps.
Description
are supported here, with the range from
of the receiving end.
than 1 during cross-segment
code rate is set to 2Mbps, the
REACH ENC1260
User's Manual
file, which can be