Parameter Setting; Video Setting; Audio Setting - Reach ENC110 User Manual

(1) Enter new IP address;
(2) Click "change";
(3) The encoder will restart automatically to complete the change.

2.6 Parameter Setting

Through the parameter setting, you can set the frame rate, code rate of the encoder
to acquire the video/audio signal, the recording quality, the coded image position as
well as the caption adding function.

2.7.1 Video setting

Through the video setting, you can set the coding frame rate for the encoder to
acquire the video signal and the image mode. The coding mode includes the fixed
code rate mode and fixed quality mode. The users with low available network
bandwidth are advised to adopt the fixed code rate mode, especially those with the
activity of public network live broadcast. They can adjust the coding bandwidth to the
appropriate range in the fixed code rate mode.

2.7.2 Audio setting

Through the audio setting, you can set the sampling rate and coding frame rate for
the encoder to acquire the audio signal, and select the audio acquisition interface
according to the actual situation. This product currently supports the acquisition of
Mic audio signal and linear audio signal. The users with low available network
bandwidth are advised to adopt low audio code rate, especially those with the activity
of public network live broadcast. They can adjust the audio code rate to the
appropriate range according to the actual needs.
Copyright© Shenzhen Reach IT Co., Ltd.
REACH ENC110 SD Encoder
User Manual
11 / 12