Note:
1.
The encoder is equipped with a
2.
The HD-SDI interface
3.
The DVI-I interface supports
signals;
4.
The COM port is mainly used for
port is mainly used for camera control and supportsRS232
RS422 need to be converted into
need to be converted into RS232.
2.3 Connecting Cables
Connecting Cables
3
Guide for Beginners
Guide for Beginners
3.1
Turning on and off the Device
Turning on and off the Device
ENC1260 is not provided with a power switch, and it will be automatically started only
is not provided with a power switch, and it will be automatically started only
is not provided with a power switch, and it will be automatically started only
the power supply is connected and be automatically turned off once the
is connected and be automatically turned off once the power supply
is connected and be automatically turned off once the
is disconnected. To ensure safety of the device, please connect the device and the
disconnected. To ensure safety of the device, please connect the device and the
disconnected. To ensure safety of the device, please connect the device and the
Copyright © Shenzhen Reach Tech Co., Ltd.
Copyright © Shenzhen Reach Tech Co., Ltd.8 / 33
(disabled)
is equipped with a 12V/3A power adaptor;
interface can support up to 1080p@30Hz;
interface supportsYPbPr/RGBHV, YCbCr/DVI and computer screen
DVI cable
DVI
Network cable
Network cable
and computer screen
RS232. RS485 and,
HD-SDI cable
Power adaptor
REACH ENC1260
User's Manual